The lean tube workbench has good corrosion resistance, and is suitable for various applications such as mold, bench worker, inspection, maintenance, assembly, etc. Strong dirt resistance, impact resistance and load-bearing capacity. Lean tube workbench is a worktable composed of 28mm diameter lean tubes and a wide variety of connectors ,and other applications such as panel, row plug, etc. are installed according to the needs of the operation. Next, we will introduce the maintenance methods of lean pipe workbench:
1. Keep the room dry and clean. Moist air will not only rust manufacturing materials, but also affect the normal operation of electrical circuits. Moist air is also conducive to the growth of bacteria and mold. The clean environment can also extend the service life of the filter plate.
2.Regular cleaning of equipment is an important part of normal use. Cleaning shall include routine cleaning and regular treatment before and after use. During fumigation, all gaps shall be completely sealed. For example, the operation port is equipped with a movable baffle cover type ultra clean workbench, which can be sealed with plastic film. The filter plate and ultraviolet germicidal lamp of the lean tube workbench have a calibrated service life and should be replaced on schedule.
3.Once the lean pipe workbench is assembled, do not disassemble it frequently, which may cause instability of the lean pipe workbench and reduce the service time of the workbench;
4.The surface of the lean pipe workbench is smooth and clean. Do not place sharp and sharp tools or objects to avoid scratching the desktop of the lean pipe workbench;
5.Lean tube worktable shall be handled with care during use, and shall not stand on the worktable table or let it bear more than its rated load;
6.It should be placed on a relatively flat ground and in a relatively dry environment. Do not place acidic and oily objects on the surface of the lean tube workbench to avoid corrosion of the table top of the lean tube workbench and affecting its normal use.
Post time: Dec-16-2022